1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

For Sale Kelling sound harness(pbass)

Discussion in 'For Sale: Parts, Strings, and Accessories' started by Maryvillebass, Nov 30, 2017.

  1. Maryvillebass

    Maryvillebass Supporting Member

    Aug 27, 2015
    Maryville, TN
    P bass harness. This was made by Kelling Sound, a guy on eBay that does quality work. This one has a 10 position rotary tone pot. Position 1 is wide open tone, position 10 is completely off, but the middle positions are just varying degrees of mid cut... i like it, a lot, but i am building more vintage type basses now.

    30 shipped.

    Attached Files:

    emblymouse likes this.
  2. emblymouse

    emblymouse exempt Supporting Member

    Jan 22, 2006
    Lakland Artist Endorser
    Big bump for Kelling Sound.
    NigelD and Maryvillebass like this.
  3. twinfallsbass

    twinfallsbass Supporting Member

    Jan 24, 2005
    Somewhere in AZ
    Does this harness improve the sound of the bass over the stock harness?
  4. Maryvillebass

    Maryvillebass Supporting Member

    Aug 27, 2015
    Maryville, TN
    This harness does improve the sound in a number of situations..
    1. If your pots and caps suck. If you have an import bass with cheap pots this will definitely clear up the sound and get the full potential from your pickups.

    2. If you want to control the Mids on your p bass, this improves not your sound, but your control of the sound. A passive tone control is kinda like having only one knob on your stereo and all it controls is treble. You can turn it up or turn it down... that’s it. This adds, by use of capacitors, a way to cut mids.... so position 1 is essentially if you ran the tone knob wide open, position 10 is tone knob all the way down, and the nine positions in the middle cut mids to varying degrees.
  5. sikamikanico


    Mar 17, 2004
    Sent you a PM - trades considered?
  6. Maryvillebass

    Maryvillebass Supporting Member

    Aug 27, 2015
    Maryville, TN
    Sorry, just noticed the pm, i don’t have a need for the pickup, it’s a good one though!

Share This Page