/ Register

Kustom Connections

Discussion in 'Amps and Cabs [BG]' started by 74113083, Nov 17, 2005.

  1. Nov 17, 2005 #1
    74113083

    74113083

    Jun 13, 2005
    Bundaberg
    Hi All. I recently just purchased a Kustom Groovebass 1200, however not checking the connections :rollno: found that they use the Speak-On connectors to connect to the cabs.

    I use a 4x10 + 1x15 hartke cabs which use the 1/4 inch jack connections. Am I going to be able to find a cable which goes from Speak-On to 1/4 inch and is this a good idea or should I start looking for some new cabs?
     
  2. Nov 17, 2005 #2
    liquid-dream-ex

    liquid-dream-ex

    May 7, 2003
    Austria , Villach
    Yes, there are cables speakon to 1/4 inch. You can also buy an adapter for hte speakon cable if you want.

    You will need only one adaptor/cable, you can connect the cabs with each other with a 1/4 inch cable.

    I played through exactly that setup at a festival. It was loud and had some punch, but it wasn'T exactly the sound i like. Sounded too muffled.
     
  3. Nov 17, 2005 #3
    74113083

    74113083

    Jun 13, 2005
    Bundaberg
    Thats a relief, thanks for the help liquid!
     
  4. Nov 17, 2005 #4
    truckin88

    truckin88

    Oct 18, 2001
    Newburgh, NY
    I would look at adding speakon to the cabs huge benefits.
     
  5. Nov 17, 2005 #5
    henryjurstin13

    henryjurstin13

    Jun 5, 2005
    NWAR - 72764