SOLD Markbass - Little Mark Tube 800-Watt Bass Head

MarkBass ... a solid name in Bass Amplification.

A popular product - and Well Respected. Light to haul, easy to use, and ready to rock or roll or jazz or mambo ... cool ALSO because of the second input - I've used it for mic'ing the kick-drum in a small combo, adding that kick to my playing helps a lot in terms of both coordination and Crowd Appreciation.

Selling because I literally have 10 other Bass Amps

Here are the specs:

INPUT 1 - impedance 500 Kohm, max. voltage 15 Vpp
INPUT 2 (Balanced XLR/1/4" combo) balanced - impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
EFFECT RETURN - impedance 33 Kohm, max. voltage 10 Vpp
CONTROLS - GAIN 1 and GAIN 2 - both -60 dB to +23 dB range
MIX - mixes tube and solid state gain
MASTER VOLUME
LINE OUT LEVEL
GROUND LIFT - switch on rear panel
PRE/POST EQ - switch on rear panel
MUTE - push/pull on master knob
EQUALIZATION
LOW - center frequency: 40 Hz; level: ±16 dB
LOW MID - center frequency: 360 Hz, level: ±16 dB
HIGH MID - center frequency: 800 Hz, level: ±16 dB
HIGH - center frequency: 10 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter) - center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator) - frequency range 250 Hz-20 kHz (cut)
This Video does a real good job demo'ing the VLE and VPF functions - very versatile knobs (a different head, but same results)


OUTPUT
LINE OUT - balanced XLR, max. voltage 20 Vpp

EFFECT SEND - unbalanced, max. voltage 20 Vpp (pre-EQ)

TUNER OUT
unbalanced, max. voltage 2 Vpp

SPEAKER OUT
speakon/1/4" combo, 1/4"


OTHER

WEIGHT
6.31 lbs / 2.86 kg

DEPTH
10.1 in. / 25.6 cm

WIDTH
10.87 in. / 27.6 cm

HEIGHT
2.8 in. / 7.1 cm

OUTPUT POWER
500W RMS @ 8 ohm, 800W RMS @ 4 ohm

POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz

Shipping is estimated - if it's close, we're good.