1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

For Sale Markbass LM Tube 800 w/bag, Mint cond

Discussion in 'For Sale: Amps, Preamps, and Cabinets' started by xhawk5, Aug 10, 2018.


  1. xhawk5

    xhawk5 Supporting Member

    Sep 17, 2007
    Palm Coast, Florida
    Price:
    $600
    Location:
    Florida
    Here is my LM Tube 800 in Minty condition. Never out to a gig, only practice space. I need to get to 2 ohms so this is up for sale, as it will go to 4 ohm.

    You probably know all about this amp but here are the specs just in case:

    INPUT 1
    impedance 500 Kohm, max. voltage 15 Vpp

    INPUT 2 (Balanced XLR/1/4" combo)
    balanced, impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V

    EFFECT RETURN
    impedance 33 Kohm, max. voltage 10 Vpp

    CONTROLS

    GAIN 1:
    -60 dB to +23 dB range

    GAIN 2:
    -60 dB to +23 dB range

    MIX:
    mixes tube and solid state gain

    MASTER VOLUME

    LINE OUT LEVEL

    GROUND LIFT:
    switch on rear panel

    PRE/POST EQ:
    switch on rear panel

    MUTE:
    push/pull on master knob

    EQUALIZATION

    LOW:
    center frequency: 40 Hz; level: ±16 dB

    LOW MID:
    center frequency: 360 Hz, level: ±16 dB

    HIGH MID:
    center frequency: 800 Hz, level: ±16 dB

    HIGH:
    center frequency: 10 kHz, level: ±16 dB

    VPF (Variable Pre-shape Filter)
    center frequency 380 Hz (cut)

    VLE (Vintage Loudspeaker Emulator)
    frequency range 250 Hz-20 kHz (cut)


    OUTPUT

    LINE OUT
    balanced XLR, max. voltage 20 Vpp

    EFFECT SEND
    unbalanced, max. voltage 20 Vpp (pre-EQ)

    TUNER OUT
    unbalanced, max. voltage 2 Vpp

    SPEAKER OUT
    speakon/1/4" combo, 1/4"


    OTHER

    WEIGHT
    6.31 lbs / 2.86 kg

    DEPTH
    10.1 in. / 25.6 cm

    WIDTH
    10.87 in. / 27.6 cm

    HEIGHT
    2.8 in. / 7.1 cm

    OUTPUT POWER
    500W RMS @ 8 ohm, 800W RMS @ 4 ohm


    POWER REQUIREMENT
    100/120V; 230V; 240V
    50/60Hz

    Ships in a new Markbass bag with cable pocket and vent areas.

    $600 shipped Con US. (Not going to $500 so don't ask.)

    These are one of the best "Bang for your Buck" lightweight amps around!

    Made in Italy, date code: 03-2012

    All questions in a PM please.


    There is a small piece of yellow tape over the power light. (Those lights are bright as a little sun. Tape can be removed w/o an issue.)
    IMG_3899.JPG IMG_3897.JPG IMG_3898.JPG IMG_3900.JPG
     
    pjbassist likes this.
  2. CoffeeLove

    CoffeeLove Supporting Member

    Aug 4, 2013
    California
    A great amp here folks, love mine, a worthwhile purchase!
     
    pjbassist and xhawk5 like this.

Share This Page