1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

SOLD MAS26 MASoundworks - MAS 26 / MAS-26

Discussion in 'For Sale: Amps, Preamps, and Cabinets' started by jharms80439, Oct 26, 2018.

  1. jharms80439

    jharms80439 Supporting Member

    Nov 23, 2004
    Evergreen, CO
    Up for sale is an awesome Mike Arnopol (MASoundworks 26) MAS26 - 250W/~98dB sensitivity - $475 shipped, ConUS, PayPal only. Comes with a Pyle PSTND1 tripod extending stand that will be shipped separately. Cab is 26" by 8 1/4" by 14" deep and weighs 24.4 pounds (about 24 lbs 7 ounces).

    This one has the 4 Ohm / 16 Ohm switch and the "pole" cup on the bottom to get it up to ear level (with the included stand!).

    2x6.5" drivers and 2x3" mids/tweeters. I've used this cab with a MAS110 Subwoofer when I owned a MAS110Flex and I've even used it with my MAS112. You can use it with the current MAS46 too for an awesome MAS66 setup.

    Works great on acoustic upright or bass guitar. Blows most 2x10 cab cabs away for responsiveness, tone and lows. I've used it at church, when subbing on jazz trio gigs and for practicing at my office. At moderate volumes it sounds pretty close in tone to my MAS112 918Sound driver), but the MAS112 does very loud well. This cab pretty goes loud but with the MAS technology, volume doesn't need to be that loud and can still be heard everywhere - but still it is a 26 after all. :)

    There's a couple of threads on the 26 here on TB and there've been a few for sale quite a while back. This one has really served me well!

    Mike will be building me another bass cab so that I can get my Ampeg B-15 on - MAS style - so this one needs to go.

    Thanks for looking!


    IMG_3382. IMG_3383. IMG_3384. IMG_3385. IMG_3386. IMG_3388. IMG_3393.
    Last edited: Oct 26, 2018
  2. SamuelHarris

    SamuelHarris Supporting Member

    Jul 26, 2009
    Detroit MI USA
    Any chance of a pic of it on the stand?
  3. jharms80439

    jharms80439 Supporting Member

    Nov 23, 2004
    Evergreen, CO
    Here you go.

    Lowest and highest positions - has set points at ~5” in between. Tripod footprint width is about the same as the cab flat on the floor.


    Oh and pardon the messy floor on the lower right. I was in process of rebuilding my pedalboard. :)

    78FF785A-A1BA-4DD0-8355-3973C7D23C00. 4A36779D-B4E9-4182-9C8F-806CB0155C01.
  4. jharms80439

    jharms80439 Supporting Member

    Nov 23, 2004
    Evergreen, CO
    Sold pending payment.


Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.