Meet my new Ashdown combo

Say hello to my new Ashdown MAG300-210 combo.

I´m really happy with this amp. It has plenty of power for rehersals and for small and, I think, medium gigs. But as it has the option to plug another 8 or 4 Ohm cab (that I will buy in the near future) I have enough power to cover almost any gig my bands would play.

Soundwise is very warm and fills de room thanks to its rear ports. The EQ helps a lot to get the bass stand out in the mix. i love that "220 Hz" knob.

Here are the specs (from Ashdown´s wep page) and a (crappy) picture of it.



Power Output (RMS) 307W
Power Requirement 230 / 115V
Speaker Configuration 2 x 10" BlueLine speaker + tweeter
Frequency Response -3dB at 17Hz and 30KHz
Speaker Outputs Minimum impedance 4 Ohms
High Instrument Input Impedance 3.9MOhms / Input range 150mV - 20V p-p
Low Instrument Input Impedance 10KOhms / Input range 300mV - 40V p-p
Line Input Impedance 22k Ohms / Input level 0dBu nominal
DI Output 600 Ohms balanced / Level -20dBu nominal
Tuner Output Impedance 22k Ohms, level 0dBu nominal
Signal to noise Better than 80dB (EQ flat)
EQ Bass +/-15dB @ 100Hz
Lo Mid +/-15dB @ 220Hz
Middle +/-15dB @ 660Hz
Hi Mid +/-15dB @ 1.6kHz
Treble +/-15dB @ 7kHz shelving
Deep +8dB @ 50Hz
Bright +10dB @ 10kHz
Effects Send Impedance 22k Ohms, level 0dBu nominal
Effects Return Impedance 22k Ohms / Level 0dBu nominal
Distortion Less than 0.5% THD
H x W x D (mm) 581 x 610 x 335
Weight (kg) 35