Mesa Boogie D-800+ and Mark Bass cabs

Discussion in 'Amps and Cabs [BG]' started by Randy_G, Aug 21, 2019.


  1. Randy_G

    Randy_G

    Aug 19, 2019
    I am using 151p and 102p Mark Bass cabs and was wondering if the Mesa Boogie D-800+ head would work with it. I’ve read in other posts that the head didn’t work with yellow speakers at full power, however others have said that has changed. Any help would be greatly appreciated.
     
  2. jlepre

    jlepre

    Nov 12, 2007
    Cedar Knolls, NJ
    As long as each cab is rated at 8 ohms and NOT 4 ohms you can pair these with that amp.
     
  3. Randy_G

    Randy_G

    Aug 19, 2019
    That’s awesome! Thanks for the info. I have an old SWR500 that has developed a ground loop noise in the output XLR, so I decided it’s time to start searching for new heads. The Mesa Boogie caught my attention and seems like a really nice unit.
     
  4. jlepre

    jlepre

    Nov 12, 2007
    Cedar Knolls, NJ
    Just be sure that the 102P is an 8ohm, and it is also available in a 4 ohm.
    *EDIT* Disregard. That head is stable down to 2 ohms. You're fine with 4 or 8 ohms.
     
    eriky4003 likes this.
  5. Primary

    Primary TB Assistant

    Here are some related products that TB members are talking about. Clicking on a product will take you to TB’s partner, Primary, where you can find links to TB discussions about these products.

     
    May 22, 2022

Share This Page