1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

My Ibanez 35 Sound wave combo has a male 1/4" cord on the cab?

Discussion in 'Amps and Cabs [BG]' started by peekypoo, Dec 11, 2017.


  1. I'm looking for an adapter so I can use the 1/4"cord that protrudes from the top of the cab, to daisy chain to a diy 10" 8ohm cab.
    Any help or a link would be great.Thanks for your help.
     
  2. SteveCS

    SteveCS

    Nov 19, 2014
    Hampshire, UK
    Hopefully not going out too far on a limb but if the amp does not have an extension speaker output then it probably isn't designed for a 4ohm load. The addition of a second speaker is probably a recipe for magic smoke.
     
  3. I forgot to mention that I'll be using my GK MB200 head, as the power source.
    I just want to be able use the cabinet if possible.
     
  4. Roland GR 88

    Roland GR 88

    Sep 16, 2013
    Toronto
    ffffffffffff.

    1/4 female to 1/4 female.
     
  5. SteveCS

    SteveCS

    Nov 19, 2014
    Hampshire, UK
    If you are replacing the driver (I assume you are) why not just put a new hole in the back and hook up a speakon socket?
     
  6. Why would I replace the driver?, I m pretty sure it is the same one used on the promethious line.
     
  7. SteveCS

    SteveCS

    Nov 19, 2014
    Hampshire, UK
    Because i assumed you would not want to connect the speaker from a 35W combo to a 200W amp. But if you are sure...
     
    lz4005 likes this.