1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Necks, pickups, tuners, bridges, neck plates, etc.

Discussion in 'For Sale: Parts, Strings, and Accessories' started by fbny71, Aug 21, 2012.


Thread Status:
Not open for further replies.
  1. fbny71

    fbny71 Supporting Member

    May 28, 2010
    West Hempstead, NY
    Stuff from projects I've started that I don't have time to finish and I could use the room and the money. Prices are shipped CONUS OBO.

    Lefty SX neck & Aftermarket P neck with Fender decal: c65a5559.

    [DEL]Lefty SX Jazz Neck, maple/maple, bound blocked. Nut is not glued in so you can use it lefty or reverse headstock like I had intended to. Glossy finish all around, never installed- $75.[/DEL] SOLD
    [DEL]Unknown make Precision maple/maple neck, when I bought this one it had little use, frets are in great shape and Fender decal already applied. Besides headstock the neck is unfinished or maybe satin finish or just sealer not really sure but feels great- $90.[/DEL] SOLD

    Knobs, neck plates, bridges:
    dc269be8.

    [DEL]Knobs- [DEL]3[/DEL] 1 with a screw, 2 just push on, all are similar looking but I've grouped them so you can see that they're slightly different knobs- $2 each- [DEL]$8 all/ five[/DEL] $5 all three.[/DEL] SOLD
    [DEL]Blank neck plate, with gasket, no screws- $4.[/DEL] SOLD
    Aftermarket Fender style bent plate bridge, five screws in standard mounting location plus in in each forward corner, no screws- $6.
    [DEL]Genuine Fender Corona, CA neck plate and screws- $9.00.[/DEL] SOLD
    Aftermarket string tree with screw- $3.

    Misc. black hardware:
    755ff141.

    [DEL]Black Fender style bent plate bridge with screws (photo shows four, but I found the fifth screw) $10.[/DEL] SOLD
    [DEL]Two different sets of strap buttons with gaskets and screws- $3 each pair.[/DEL] SOLD
    [DEL]Black Gotoh style tuners with screw on bushings and screws- $16.[/DEL] SOLD
    [DEL]Vintage style, open gear tuners with bushings and screws- $16.[/DEL] SOLD

    Vintage style, open gear tuners:
    68b52c8c.

    Vintage style, open gear tuners- YES screws, NO bushings- $13.
     
  2. fbny71

    fbny71 Supporting Member

    May 28, 2010
    West Hempstead, NY
    Genuine Fender Corona, CA neck plate and screws sold.

    Aftermarket P neck with Fender waterslide decal sold.

    Black Gotoh style tuners with screw on bushings and screws sold.

    Both sets of black strap buttons with gaskets and screws sold.

    Vintage style, open gear tuners with screws and bushings sold.

    Blank neck plate with gasket sold.

    All knobs sold.

    Black Fender style bent plate bridge with screws sold.

    Lefty jazz neck sold.
     
  3. DaveNinja

    DaveNinja

    Jan 25, 2012
    Sacramento
    Black Bridge arrived today. Looks great. thanks!
     
  4. fbny71

    fbny71 Supporting Member

    May 28, 2010
    West Hempstead, NY
    The following is still available:

    Jazz body
    P/J body and neck
    Aftermarket tuners with screws but no bushings
    Aftermarket string tree with screw
    Aftermarket bent plate bridge no screws
     
  5. Pm'd
     
  6. fbny71

    fbny71 Supporting Member

    May 28, 2010
    West Hempstead, NY
    Replied
     
  7. fbny71

    fbny71 Supporting Member

    May 28, 2010
    West Hempstead, NY
    I think these are medium jumbo frets. A new photo attached with a penny for size reference. The frets are in excellent shape...I couldn't find anything more than very minor wear.
     

    Attached Files:

  8. fbny71

    fbny71 Supporting Member

    May 28, 2010
    West Hempstead, NY
    Neck sold...thanks TC2112...off to package.
     
  9. fbny71

    fbny71 Supporting Member

    May 28, 2010
    West Hempstead, NY
    Here's another project I had hoped to have finished by now...but I never even started! I had hoped to de-fret the neck, refinish the body, drop in decent electronics...but alas never any time and I'm tired of seeing all these different pieces lying around my music room/office with no work having even been started and no clear time line of when I even would start.

    As can be seen on the headstock, this is a Carlo Robelli (Sam Ash house brand) four string, there's no hardware, no electronics not even a jack but the control cavity and truss rod covers with screws are there. And, though not pictured, it does come with the neck screws as well.

    More photos upon request.

    $75 shipped CONUS OBO.

    3604f6f4.

    718fc6a0.
     
  10. fbny71

    fbny71 Supporting Member

    May 28, 2010
    West Hempstead, NY
    J body...except for the runny spray can paint courtesy of yours truly, from origins unknown. I'm pretty sure it is basswood and there's at least two not so nicely matched pieces under the paint so solid color a must...approx. 5 lbs. 4 oz. $45

    19e0573c.
    e7577065.
    788061b1.
    17a418d8.
    1f4a7f78.
     
  11. fbny71

    fbny71 Supporting Member

    May 28, 2010
    West Hempstead, NY
    bump for offers on any of this stuff...I'd love to be parts free to be able to start fresh.
     
  12. xaxxat

    xaxxat Supporting Member

    Oct 31, 2008
    What's the string spacing on the bridge on the left?
     
  13. fbny71

    fbny71 Supporting Member

    May 28, 2010
    West Hempstead, NY
    The bridge on the left was already sold.

    It was from a Peavey Fury P bass which I still have (and love) that had all its hardware blacked out. I don't know what the spacing was- sorry.
     
  14. fbny71

    fbny71 Supporting Member

    May 28, 2010
    West Hempstead, NY
    $60 shipped for this project body and neck?
     
  15. fbny71

    fbny71 Supporting Member

    May 28, 2010
    West Hempstead, NY
    $10 for the tuners with screws but no bushings?
     
  16. fbny71

    fbny71 Supporting Member

    May 28, 2010
    West Hempstead, NY
    Will make new thread for remaining items.
     

Thread Status:
Not open for further replies.

Share This Page