1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

newb pickups question

Discussion in 'Pickups & Electronics [BG]' started by Avril, Sep 2, 2002.

  1. Avril


    Aug 23, 2002
    ok..i was thinking about buying a quarter pound seymour duncan pick up for p bass. are these any good and one more thing. is it hard to install these things? ive never done anything to my bass before. Does anyone know a site that explains or can you explain? thanks
  2. If you buy one this install instructions are right in the box.

    Its a great P bass pick up. Used by alot of pbass players and is usually a great add on to any instrument.

    To install

    Remove or really looses strings

    1) remove pick guard

    2) remove 4 screws holding pick up in to body

    3) Solder the old wires off and put the new ones on.

    4) Reassemble and adjust pickup height to specs or taste.

    Usually takes less then an hour if your good with a soldering iron.

    If not practice first on some wire or something, its not to hard to get the hang of

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.