Ok, so I have had this pedal for a little while now, and I like the configuration, but I only use half of it, and in reality, I don't use it for what it should be used for, so off it goes into the wild. Below is the original text from the post I got it from. In the original thread, I had stated that I was on the track to repair this pice, and when it arrived, I was able to open it up, and resolved the issue. I have never had a no sound situation with this, and it is installed on my gigging board. I feel the setup is great for someone that wants to put all their pedals in different loops to avoid tone suck. Each loop runs into the next, and out. Great little set up. Use 3 or 7. Again, I have never had an issue with getting tone out of this box, and it works great. I am posting his original picture in the thread, and can take and add my own pics tonight. Here is the original text from the original owner: _________________________________________________________________________________________________________________ This could be a great deal for someone! But please his has some good and some bad. In the interest of full disclosure, please make sure you read this in its entirety if interested and ask any questions before buying. To the good: I had this seven channel looper custom made per my specs by Ryan at Pacific Custom. Since I no longer play live I no longer need such an extravagant system. This is a unique seven channel looping system that is actually two loopers in one. It can serve as two separate effect loopers, or as one large looping system with the ability to by channels 4-7 individually. The first is box is a three channel looper with a master bypass. The MB is indicated by a green LED. The rest of the LEDs are red. This includes two Switchcraft 1/4 to ¼ couplings to connect them with as well. The second box is labeled channels 4-7. The master in/out is on the left hand side and mirror the channel 3 in/out for the first box. By this method, you have a loop within a loop, so by depressing channel 3 bypass channels 4-7 ONLY all at once, while leaving channels 1 and 2 active if you wish or you can just bypass everything at once by depressing the master bypass. This gives you the ability to have a ton of different set up options, using 4-7 as independent effects loops that you can integrate together, use separately or individually or in whatever fashion you like. Physical measurements are about 12 ¼ w by 2 1/8 t by 2 deep each and when coupled they are 25 ¾ w. Bottom is covvered with heavy duty velcro. And now, the bad (or the good I think, if you have a bit of know how) There seems to be an intermittent problem with the master bypass. It seems there is something wrong with the master bypass. When engaged I get sound from my bass but when disengaged to allow the effect loops 1-3 to operate I at times get nothing. A person with a little bit of knowledge and a soldering iron could probably fix this themselves rather cheaply, but I am afraid I am not one of those people. I paid over $204.80 for these pedals total. Since they do not function correctly and they are pretty unique and pacific Customs seems to be no longer in business, I have little idea where to start. A simple 4 channel Looper is going for $125.00 now. These are sold as is. _____________________________________________________________________________________________________________________ I am asking $125 shipped OBO. I am looking at another blender pedal which will serve my purposes better. I ship everywhere, but prices will reflect shipping. Overseas, be prepared to pat to ship this out. I am sure these will fit in a flat rate box of some type. I'll include barrel connectors to put the two together as it was given to me. $125 Shipped CONUS. Paypal accepted. PM me to get this awesome set up ASAP!!!! I can ship as quickly as tomorrow.