1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

TRADED Peavey B-Quad 5 Bass Guitar / Modulus Graphite neck

Discussion in 'For Sale: Bass Guitars' started by pnutz, May 3, 2018.


  1. pnutz

    pnutz Supporting Member

    Price:
    0
    Strings:
    5
    Location:
    California
    IMG_0152. IMG_0145.

    Up for grabs is a pretty rare piece. A fretted Peavey B-Quad 5.

    You can find quad 4's here and there but the Quad-5's were made in small numbers and aren't offered up in the open market that often.

    Specs are as follows:

    * Modulus Graphite neck w/the KLD (1000 ladies dancing) pattern.
    * Graphite nut
    * 1 3/4" at the nut
    * 3" at the 24th fret
    * Phenolic fretboard
    * Black Hipshot Ultralite tuners (USA)
    * Maple body
    * Bartolini 72M45C pickups
    * Bartolini 5.4 18v preamp (vol/bal/bass/treb/mid w/freq switch)
    * Omega brass bridge
    * Dunlop straploks
    * About 9.5 lbs. (5955g)
    * Currently strung with DR Sunbeams (NLR5-40 / 40-120)

    Neck is straight. No scratches, nicks, dings, digs, or other maladies on the back of the neck.

    A few light scratches and swirls on the back of the body. Doesn't affect tone whatsoever.

    When i purchased the bass, the original electronics were in disrepair so went with the Bartolini setup (my personal favorite).

    Looking to add preamps (Alembic, SWR, Arkham, Demeter, etc.) to my rack so offers along those lines would very much be considered.

    DNA cabs would also be looked upon favorably.

    But feel free to pm me with any ideas you may have. Worse I can say is no.

    Feel free to ask any questions or for more pix.

    Thanks for looking!
     
    bobunit and Joshua Pickenpaugh like this.
  2. bassman28

    bassman28 Supporting Member

    Dec 31, 2010
    North Carolina
    Pmd
     
  3. Any interest in a straight sale?
     
  4. pnutz

    pnutz Supporting Member

    all pm's answered...
     

Share This Page