1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

For Sale Pending Sale. BBE B-Max-T Preamp , Stewart World 2.1 Power Amp

Discussion in 'For Sale: Amps, Preamps, and Cabinets' started by basshawk, Jun 4, 2014.


  1. basshawk

    basshawk

    Dec 18, 2005
    Tucson, AZ
    Price:
    $500 all
    Location:
    Arizona
    amp.
    I'm departing with my beloved BBE B-Max-T Preamp, and Stewart World 2.1 Power amp. Both are in good condition. I have been gigging with them and they are doing fine. I'm selling them because I plan to go to a Amp/Pre combination. I'd like to see them go together, so I'm giving a $100 discount off the separately purchased price to my TB brothers. I'm asking $275 for the BBE, and $325 for the Stewart World. I'll sell both for $500. The price does NOT include shipping. I'll even throw in the Furman Power conditioner and 6-space SKB rack if you buy both.

    Stewart World 2.1 Power Amp
    900W x 2 @ 2 ohms per channel 650W x 2 @ 4 ohms per channel 400W x 2 @ 8 ohms per channel
    1800W x 1 @ 4 ohms Bridged 1300W x 1 @ 8 ohms Bridged 800W x 1 @16 ohms Bridged
    400W x 2 @ 8 ohms per channel
    20Hz – 20 kHz
    15Hz – 45kHz
    >100dB (a-wtd.,650W @ 4 ohms
    3 pin XLR, TRS 1⁄4” Phone, and Barrier Strip
    6 Gauge 5-way binding post
    66x (+36.4 dB)
    17 lbs
    3.5”H x 19”W x 15” D (Two rack spaces)
    <5 amps, 120Vac (600watts)
    BBE Bmax-T Preamp
    Frequency response @ Line Out: 15 Hz to 30 kHz ±3 dB
    • S/N Ratio: 100 dB @ unity
    • Total Harmonic Distortion (THD): Tube section 1%; Post-tube section <0.02% • Maximum output: +22 dBu • Noise: -77 dBu @ unity gain, eq flat
    • Input impedance: Passive 1M ohm; Active 100k ohms
    • Output impedance: Balanced XLR 600 ohms, pin #2 hot or "+"; Unbalanced 1/4" 1K ohms • Interactive EQ: Treble (boost only) 15 dB @ 6 kHz; Mid (cut only) 15 dB @ 300 Hz; Bass (boost only) 15 dB @ 40 Hz • Bright switch: +10 dB @ 10 kHz, eq flat
    • Para-mids: ±12 dB from 250 Hz to 1 kHz (* 0 dBu=0.775mVrms)

    Furman RP-8D Power Conditioner
    Maximum output current: 15 amps (1800 watts at 120 VAC)
    Line Cords: 6 ft. captive, 14 AWG, with 3-conductor Edison plug
    Lamps: 2 x 7 watts
    AC Voltmeter:
    Range 60 to 150 VAC;
    Accuracy +/- 2 VAC
    Spike Protection Mode: Line to neutral, neutral to ground, line to ground.
    Clamping Voltage: 250 volts peak
    Maximum surge current: 4,500 amps
    Maximum spike energy: 102 joules
    Noise attenuation: Transverse mode: Greater than 20 dB, 1.5 to 200 MHz.
    Dimensions (HxWxD): 1.75 x 19 x 7.5 in. with light tubes in; when fully extended light tubes reach 3.5in. from front panel surface.
    Weight: 5 lbs (2.3 kg).
    Construction: Steel chassis, black painted
    Power Consumption: 14 watts if lamps are present
     
    Last edited: Jun 5, 2014
  2. basshawk

    basshawk

    Dec 18, 2005
    Tucson, AZ
    bumpin
     
  3. basshawk

    basshawk

    Dec 18, 2005
    Tucson, AZ
    Bump
     
  4. basshawk

    basshawk

    Dec 18, 2005
    Tucson, AZ
    bump
     
  5. 5not4

    5not4

    Sep 7, 2000
    Flint, MI
    PM sent.
     
  6. basshawk

    basshawk

    Dec 18, 2005
    Tucson, AZ
    bump
     
  7. basshawk

    basshawk

    Dec 18, 2005
    Tucson, AZ
    Ok. My final offer, and even though I think it's already a good one, I'll split the shipping with whomever takes the amp/preamp (and free Furman and SKB case) deal. If it doesn't sell now, I guess it's not meant to be, and I'll happily keep my awesome equipment.
     
  8. 5not4

    5not4

    Sep 7, 2000
    Flint, MI
    PM sent.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.