1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

Pickup Switch?

Discussion in 'Pickups & Electronics [BG]' started by fgnbtz, May 2, 2010.


  1. fgnbtz

    fgnbtz

    Nov 26, 2008
    Tampa, FL
  2. It's probably a series/parallel switch for the bridge pickup.

    Do you have a picture of the wiring?
     
  3. fgnbtz

    fgnbtz

    Nov 26, 2008
    Tampa, FL
    no :(
     
  4. Kyon`

    Kyon`

    Aug 17, 2007
    Boston, MA
    Coil split possibly?
     
  5. GlennW

    GlennW

    Sep 6, 2006
    From the link you posted: "Rear PU Coil Sprit Switch"

    I ruv it, someone has a sense of humor.
     
  6. BassLife77

    BassLife77

    Nov 13, 2009
    San Diego
    looks like
    1 - front pickup
    3 - both pickups
    2 - rear pickup
     
  7. JTE

    JTE Supporting Member

    Mar 12, 2008
    Central Illinois, USA
    Since it's labeled on the picture as "Rear PU Coil Sprit Switch", it would appear to be just like a Lakland 4-94. The bridge pickup is a dual-coil PUP. That little toggle switch selects the neck coil, both coils, or the bridge coil of the humbucker. It's simple and easy to check as well. Solo the bridge PUP (use the blend control rolled all the way back to only the bridge PUP). Then take a small screwdriver or something else ferrous, and tap the pickup where the coils of that PUP would be. With the switch all the way towards the neck, you'll only get a loud "thunk" out of the coil closest to the neck. With the switch in the middle you'll get it out of both coils, and with the switch to the rear, you'll only get the bridge coil.

    John
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.