1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Please help me with some wiring (3 wire passive pickups with push/pull pots)

Discussion in 'Pickups & Electronics [BG]' started by phishaholik, Oct 10, 2013.


  1. phishaholik

    phishaholik Supporting Member

    Aug 20, 2005
    Portland, Oregon
    Hey guys,

    I have these Schecter Monstertone pickups that came in a bass I used to own and I'm not sure how to wire them back up. All 3 of the pots are push/pull pots and I've never wired these style pots before. I don't remember if it was because they had a coil tap option or for a series/parallel option.

    Here are the pictures that I have. I think I can figure out how to wire the pickups to the volume pots, since the wires were cut and not de-soldered, but I have absolutely no idea how to wire the tone pot in there.


    I would really, really, really appreciate some help.


    Thanks guys!


    Michael

    photo14_zps080e454c.

    photo15_zpsfbd0499a.

    photo16_zps0a406339.

    photo17_zps3552aa8d.
     

Share This Page