1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Please help with hooking head to 4x10 cab Peavey

Discussion in 'Amps and Cabs [BG]' started by bassstrangler, Oct 25, 2015.


  1. bassstrangler

    bassstrangler

    Mar 2, 2015
    AZ
    This is what I have: Peavey Mark III head with a Peavey 4x10 cab model number 410B from what I found out the cab is 4 ohm and the head is 4 ohm. Which output on the back of the head goes to which output on the cab. The head has tw o outputs and the cab has two inputs. Thanks for the help. DSCN1323.JPG DSCN1324.JPG DSCN1320.JPG
     
  2. bassstrangler

    bassstrangler

    Mar 2, 2015
    AZ
    Other question is why are there two inputs on the cab?
     
  3. passaloutre

    passaloutre

    Oct 4, 2015
    You can plug either jack on the amp into either jack on the cab. They're all in parallel. The two jacks on the cab are for if you want to daisy chain another cab, because some amps don't have two speaker outs.
     
    bassstrangler likes this.
  4. bassstrangler

    bassstrangler

    Mar 2, 2015
    AZ
    Awesome, I've always owned combos and never a head and cab. Picked this up for $200 and of course no info or manuals available as of yet. Guy I bought it from had no clue. I hooked it up when I brought it home and it worked , just wanted to make sure I wasn't doing anything wrong.
    Thanks!
     

Share This Page