1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

post your (realistic) dream, live effects rig.

Discussion in 'Effects [BG]' started by Bigfeet, Jul 12, 2002.

  1. Well, I've decided I'm bored and need to do some fabricating. :p

    Well here's mine. I've thought allot about what I want to add to my rig.
    I'm going to use Line6 DL4* and MM4 for my basic modulation effects. (I don't mind if they are digital.)
    Loooper Paralyzer.
    Crowther Audio P&C
    EHX Poly Octave
    EHX Bass Micro Synth *
    EHX Q-tron+* (Both EHX effects in the the Paralyzer so I can switch between Arp, Moog, Casio and envelope filter tones instantly, without having to go through a ton of mixers.)
    Loooper four loop switcher, with wet and dry out puts.
    SansAmp BDDI.
    PedalBoard.com Juicebox power suply and pedalboard w/shelf (for the Line6 effects) all in an ultralight case.

    Whirlwind Cables.

    or maybe a top of the line eventide effects unit.
  2. Josh Ryan

    Josh Ryan - that dog won't hunt, Monsignor. Supporting Member

    Mar 24, 2001
    I would like to use the switchblade thingy so I can patch anything anywhere:

    FX I use now:
    1 bassballs (Russian)
    2 qtron+
    3 small stone (Russian)
    4 Big Muff Pi

    1 105Q
    2 Bass DI+
    3 Bass autoQ

    1 Air FX

    1 Loop Station
    2 PH3
    3 Limiter/Enhancer (on the practice amp now)

    1 Sans Amp (this is only one that's on 100% of the time.
    2 Bass Compactor

    1 Composer (I think it sounds good, so sue me)

    1 bass effects multi (doesn't travel with me)

    the effects I want are many and varied. Right now I want everything in the Frostwave line, notably the Space Beam Theremin and the Blue Ringer. I need a power brick or something for these pedals, and I plan on getting the NYC standard 36 pedalboard.
  3. Brad Barker

    Brad Barker

    Apr 13, 2001
    berkeley, ca
    from instrument
    two route cpr true bypass box
    /digitech whammy/ /boss tu-2/
    ebs bass IQ
    ebs multicomp
    black box x-ray bass
    george dennis volume/chorus-flange (set for chorus)
    " " " " "(set for flange)
    george dennis phaser
    two route cpr true bypass box
    /guyatone AD-3/ /guyatone AD-3/*
    to amp

    *methinks that's what their best tiny digital delay is called...

    i don't know much about pedal boards...
  4. hyperlitem

    hyperlitem Guest

    Jul 25, 2001
    Indianapolis, IN
    wireless, sum sort of light overdrive and a octaver effect. Im not a fan of effects, but these are the only 3 id ever get, if u count wireless as an effect.
  5. FX not in the present arsenal denoted with GAS:

    Trace Elliott Dual Compressor
    EBS Octabass (GAS--have MXR for now)
    volume pedal (have 2: old JAX mono, Rogue stereo; I'd use only one in this setup of course)
    Boss PW-10 wah (amazing! Every funkateer needs one)
    EHX Bassballs (GAS Q-tron in the future)
    Boss 3-space board/case:
    NS-2 (with TU-8 in it's unmuted loop)
    SYB-3 (set for auto-wah or ray gun depending on gig; I "shoot" the audience with the latter. Hmmm-maybe a laser pointer on my headstock...)
    BF-3 (GAS--using CEB-3 now)
    Boss EQ-20 and LS-20 (GAS both-look like fun)

    I have been researching powered pedalboards as of late, since the above represents my "universal" set-up. For my church gig it's MXR octaver-JAX volume with a Korg tuner in between. For my rock trio it's everything but the "church" pedalboard, which I built using 11x14" plywood and plumber's tape (cut into small pieces and using the FX pedals' rear plate to secure them to pedal; wood screws to board).
    As the Trace requires 18v power, I usually plug my Warwick into it and it outputs to the amp; everything else is in the amp's FX loop. It would be nice to shed the Boss board and combine all of the 9v stuff on one of those nice SKB units, but the "funk" board is the PW-10 and Bassballs on another 11x14 scrap of wood and does me just fine. Both 11x14's have power strips mounted on them. The wall warts hide the pedals from the audience. Sorry for the verbosity. I guess I gotta get a digital camera & just show 'em.
  6. 6-stringer

    6-stringer Guest

    Feb 5, 2000
    My DREAM FX setup would be:
    Sansamp> EBS Octave> BMS > Deep Impact > Lovetone Meatball> Lovetone ? flange > MXR Phase 90 > Digitech whammy > Line 6 DL4 > Midi controlled Oberhiem echoplex (with a moogerfooger dubbing it up in the chain somewhere)

    But that will most likely never happen......
  7. Brendan

    Brendan Supporting Member

    Jun 18, 2000
    Austin, TX
    SansAmp BDDI
    EBS "Stack" (The line of Black Label pedals+board)

    That's all I'd really need...
  8. Bass-Whammy-Distortion-QTron-Flanger-Wah wah-Instant backwards deley pedel(forgot it's name)-Boomerang-Amp
  9. Bass-Samson Wireless-[Analog] Overdrive-Chorus-Flanger-Whammy-Wah/Volume-Delay/Echo-Lo Fi-Noise Suppressor-Amp. And a bunch more stuff I'm too lazy to think of right now.
  10. GK Diesel Dawg
    Ernie Ball Volume Pedal
    Aphex 204 (not really an effect)
    I think thats all I need

    (Perhaps aditionally a Sansamp RBI)
  11. -Sansamp RBI
    -Ravens Lab True Blue EQ
    -Q-Tron Envelope Filter
    -Boss ODB-3 Distortion Pedal
    -Sansamp Bass Compactor Pedal
    -EBS Octabass
  12. BryanB

    BryanB Moderator Staff Member Supporting Member

    This is pretty much what I have now which I like:

    Retrospec Squeeze Box
    Electro-Harmonix Octave Multiplexor
    Dredge-tone Angler
    Frantone Lo-tone
    MoogerFooger Low-pass Filter
    Akai Headrush
    Fulltone Choral-Flange

    To that I might add:

    Mutron Bi-Phase

    Definitely would want to use:

    Custom Audio Electronics RS-10 and a couple of their audio switching tools. This is trully pro stuff.

  13. Jeff Moote

    Jeff Moote Supporting Member

    Oct 11, 2001
    Beamsville, ON, Canada
    realistic, live dream rig:

    Bass into bypass box to amp.
    Bypass box to Boss LS-2
    Loop A- Fulltone Drivetrain II
    to EH Bassballs
    Loop B-EH Qtron+ (BMS in loop)
    to TC Chorus
    LS-2 to Line 6 Delay modeler
    back to bypass box

Share This Page