1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

Power Supply for 9 Pedals. All 9V.

Discussion in 'Effects [BG]' started by Asomodai, May 8, 2015.


  1. Asomodai

    Asomodai

    Jan 21, 2006
    London UK
    Evening Gents.

    Looking at a power supply for the following pedals.

    Pedal AC/DC Voltage MA
    Korg Pitch Black DC 9 35
    Mooer Bass sweeper DC 9 7
    Digitech Bass Whammy Reissue DC 9 265 (Probably a minimum)
    Idiotbox Bass Blower DC 9 10
    Tech 21 VT Bass Deluxe DC 9 100
    Boss BF2 DC 9 18
    Boss CE5 DC 9 22
    Joyo Digital Delay DC 9 34
    Budda Chakra DC 9 12

    Total MA is 503.

    I am having a hard time finding a power supply to power all these pedals at once. I was looking at the Harley Benton one which can supply 8x9V at 500 MA and 1x12V at 500MA. But none of my pedals are 12Volt. Will I be able to power any of these pedals safely with 12Volts?

    Harley Benton PowerPlant - Thomann UK

    Otherwise, What other power supplies out there can supply the juice I need for 9 9V pedals.

    Please note that I live in the UK! Any ideas?
     
  2. Get a one spot. 1.7amps and they just work.
     
  3. I use a one spot for 5 pedals and it works great. Worse case scenario get two of them. They are inexpensive and just work.
     
  4. mc900ftj

    mc900ftj Supporting Member

    Jan 21, 2014
    OneSpot. 1000+ milliamps, small, relatively cheap (buy a spare).
     
  5. mmbongo

    mmbongo Five Time World Champion Supporting Member

    Aug 5, 2009
    Carolinas
    One Spot will do it, or a Decibel11 if you want to step up to an isolated, regulated power supply.
     
  6. Owens W

    Owens W

    Jan 29, 2015
    South Carolina
    Question.
    What are your thoughts on running a daisy chain into a voodoo labs PS?
    8 pedals on the chain into 1 input on the brick. Yay? Nay?
    ive been using a one spot for the chain but am trying to eliminate the need for a power strip at the foot of my board.
     
  7. mmbongo

    mmbongo Five Time World Champion Supporting Member

    Aug 5, 2009
    Carolinas
    I do that with my Decibel11 power supply, I use the same daisy chain cable that came with my One Spot. As long as you don't exceed the current draw of the output, you'll be fine. I use one of the 300ma outputs on my DB11 to power 5 pedals.
     
  8. FretNoMore

    FretNoMore * Cooking with GAS *

    Jan 25, 2002
    The frozen north
    Start with a 1Spot or Godlyke adapter and a daisychain. High power output, low cost, uses no space on the pedalboard, and usually works great. Go to an expensive isolated power supply only if you notice any problems.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.