1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Powering a 3Leaf Enabler with PP2

Discussion in 'Effects [BG]' started by tzdroik, Feb 28, 2016.


  1. tzdroik

    tzdroik Supporting Member

    Jan 15, 2013
    Western Wisconsin
    Just got this awesome preamp from a great TBer. Thanks Scuba. I always get worried about powering these things when they are new. Anyway, I have a Voodoo PP2. On my pedalboard I also have a Line 6 G50 which is powered using the current doubler in ports 5 and 6 of the PP2. It appears the Enabler will not work on any of the other ports because they are 100 mA and the Enabler requires 300 mA. I have a 9v center negative 300 mA power supply. Could I plug that into the AC outlet of the PP2 and run it from there? If this is a stupid question I apologize. Don't troll me too hard. I don't get the whole AC / DC thing. Thanks TB
     
  2. monsterthompson

    monsterthompson The Eighth Note Wonder Of The World

    Nov 25, 2008
    Hollywood
    I had a PP2 and an Enabler. I had the experience of the Enabler not working with the PP2 for the current draw issue you mentioned. I used a OneSpot connected to the PP2 AC socket and it worked for me.
     
  3. tzdroik

    tzdroik Supporting Member

    Jan 15, 2013
    Western Wisconsin
    Awesome. Thanks MonsterT
     
    monsterthompson likes this.

Share This Page