Dismiss Notice

Psst... Ready to join TalkBass and start posting, make new friends, sell your gear, and more?  Register your free account in 30 seconds.

Question about Ibanez SRX700/500 Necks

Discussion in 'Basses [BG]' started by doc540, Oct 17, 2005.


  1. doc540

    doc540

    Jul 28, 2003
    Beaumont, Texas
    Can anyone post a link to the spec's or confirm that the neck spec's (width at nut) of the SRX 700 is the same as the SRX 500?

    Thanks!
     
  2. christle

    christle Supporting Member

    Jan 26, 2002
    Winnipeg, MB
    Hey Doc,

    SRX700:

    Scale 864mm/34"
    a : Width at Nut 38mm
    b : Width at Last Fret 62mm
    c: Thickness at 1st 21mm
    d : Thickness at 12th 23mm
    Radius 305mm

    SRX500:
    Scale 864mm/34"
    a : Width at Nut 38mm
    b : Width at Last Fret 62mm
    c: Thickness at 1st 21mm
    d : Thickness at 12th 23mm
    Radius 305mm

    Definitely look the same to me :) I got these off the Canadian site as the US site was down (again) when I looked. These necks feel like they are between a Precision 'C' neck and the skinny SR necks, but more to the Precision 'C' than the SR.

    Dan
     
  3. I REALLY liked the neck on my SRX705, very comfortable.
     
  4. christle

    christle Supporting Member

    Jan 26, 2002
    Winnipeg, MB
    Believe me I'm not compaining about my SRX505 either :D
     
  5. doc540

    doc540

    Jul 28, 2003
    Beaumont, Texas
    thanks, that's exactly what I needed.

    I'm eventually (as soon as I find a good deal on a used one) going to upgrade from my current 500 to a 700.

    thanks again!
     
  6. christle

    christle Supporting Member

    Jan 26, 2002
    Winnipeg, MB
    Make sure you post a review ;)