Psst... Ready to join TalkBass and start posting, make new friends, sell your gear, and more?  Register your free account in 30 seconds.

Rane DC24 (old model) Help Needed.....

Discussion in 'Effects [BG]' started by bassguppy, Aug 17, 2005.


  1. Brown stain delivered this to me a few days ago & I need help & advice on the best way to wire it up. It's the one that has no 1/4 inch jack for the input on channels 1 or 2. I looked on the Rane site & printed the current manual but I'm not the brightest bulb sometimes. I can't even program my VCR :p

    Looks like I'll need XLR to 1/4 cables. I'll be hooking it up to a Sansamp RBI & QSC RMX amp.

    Thanks for the assist.
     
  2. 4Mal

    4Mal Supporting Member

    Jun 2, 2002
    Columbia River Gorge
    I assume that you're going RBI ==> DC24 ==> QSC and that the RBI is 1/4" unbalanced out.

    Tip of the 1/4" goes to XLR pin 2. Ground to pin 1 or 3 and then jump 1&3 together.