Separate names with a comma.
Discussion in 'Effects [BG]' started by Moxy, Apr 13, 2015.
Can anyone give me initial settings for Rane DC24 for bass guitar.
Yes, I have detailed instructions posted in my review, linked in my sig.
mmmmmm - I'm doing something wrong getting no effect
Power light = on
Crossover Engage switch = in
Separate/Combine Outputs switch = combine
bypass button = out
All I am getting is amp sound with no effects
Using Markbass little amp - on rear of the amp there is effect send and effect return what do these plug into on the rane.
"Send" is your preamp's output. It goes to the channel 1 input on the Rane. "Return" is the power amp's input. It connects to the Rane's channel 2 (high/combine) output.
thats what I got.
turned on = distorted sound - pressed the bypass on CH2 output distortion went away
followed your instructions
but still no effect ????
Are any of the threshold LEDs doing anything?
CH1 and CH 2 gate threshold flashing when playing
My directions clearly say to turn those off. Try it exactly the way I describe first.
I've tried threshold off - light on all the time
when turn threshold back on light flickers
Hmmm... Try turning those knobs to the opposite end.
Took to a pro repair shop = its broke and probably not worth repairing - switches and pots worn hence distortion several need replacing
Sorry to hear it. That is one of the unfortunately very common risks of buying older gear off Ebay or similar web outlet.