1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Replacing a Speaker on Eden 4x10

Discussion in 'Amps and Cabs [BG]' started by DrBone, Mar 23, 2014.

  1. DrBone


    Oct 25, 2007
    Jersey City, NJ
    Hey Guys,

    I've got an older Eden 4x10 (XLT) that has this slight 'buzzing' sound. I took to grill off and isolated the woofer that was causing it, but I am not sure how to take it out to inspect further. I took all the screws out but it still seemed pretty set in there. Does anyone have any experience taking the speaker out of eden cabinets? Do I need to go in through the back in same way? Do I just need to use some more force on the front to get it loose?
  2. BassmanPaul

    BassmanPaul Gold Supporting Member

    Aug 25, 2007
    Toronto Ontario Canada
    Sometimes the woofer gets pretty stuck. I take a small flat crowbar and gently work mt way around the driver frame until the the frame releases. This is a slow, gentle operation performed with great care. this process is for FRONT mounted drivers after all the mounting hardware has bee removed.