1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

Replacing Neck on Ibanez SRX2EX1

Discussion in 'Hardware, Setup & Repair [BG]' started by vDavidAM, Mar 2, 2013.


  1. vDavidAM

    vDavidAM

    Apr 11, 2012
    I have an Ibanez SRX2EX1. Some d!ckhead (for lack of a better word) sold me an Ibanez SRX2EX1 with a pre-amp built in. Unfortunately, it turns out that the truss rod nut was stripped and over-tightened. After going to several repair shops, I learned that there was nothing I could do. We used EZ-Outs, Larger Allen Wrenches, drill bits, the whole 9 yards. Even when we got a tight fit, whenever we tried to take out the stripped nut, the metal was stripped even more. So I've decided to buy a new neck. My question is, Can I put a different sound gear neck on the SRX2EX1. For example, Can I get a SR400QM neck on the SRX2EX1 if they are the same size and have the same amount of strings?
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.