1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

rewiring a bass...will this schematic work?

Discussion in 'Basses [BG]' started by jcsbass, Dec 16, 2011.

  1. --- moving to electronics forum ---
  2. Doesn't look like it.

    Working back from the output, Tone - that's OK; then the neck pup switch will work as an on/off for the whole bass. ie switch in the down position will leave the tone knob connected to nothing. As a DPDT switch it will only have on/off, not 3 settings as your diag says.

    You could wire it so that is has on/off switches for each pickup and ditching the taps.... or by moving the wire from the bridge pup vol to the top lug you will have a switch for the front pickup and use the voil knob to mute the bridge pup.

    BTW you might want to move/post this in electronics where the electro geeks hang.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.