1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Riggage...and FANE questions

Discussion in 'Amps and Cabs [BG]' started by Reemo_bassist, Nov 3, 2005.

  1. Hi,

    I've finally made sense of all the impedances, and it looks like the Firebass will be running the two 15" cabs, and using the Firebass' crossover, feeding a Carlsbro Marlin 6-150 to run the 12"s and 10"s from 150Hz up, altogether pushing 600W, (firebass @ 4 = 450w) and the 150w from the Carlsbro.

    OK, so I opened the 15" cab, and there's a Fane Acoustics driver in there, I think it's a coaxial series one...as far as I've read, Fane are quite good?

    Attached is precisely half :rolleyes: of the rig. I've to build the 12" s yet but they are sitting next to me (Eminence Betas)

    note the missing dustcap on the 10" lol...and the horn gone from the 15" cab...it's going in again, don't worry

    Attached Files: