Schaller 463

It has a lot of small parts that are easily lost during string changes; even if they aren't lost, losing your setup on the bridge is all but guaranteed. It needs a redesign so the roller shaft is screwed in from the side preventing the loss hazard; that would do nothing to prevent spacing changes though. I wouldn't put one on a bass of mine. The bridges I use have spoiled me. They may not look too good, but their simplicity can't be beat.

I recommend, if you decide to use that bridge, go to Schaller and order a couple extra saddles, keep them with your extra strings. 3D-4 - 1 saddle (D, G, E, A) Alternatively, you could epoxy the roller shafts in place.

 

I like Schaller 3d- bridges. I’ve never had any problems with them. I’d take Schaller rather than tin plate Fender any time.

 

Hipshot A

 

...and if bought in brass, is nearly as heavy as the Schaller (IIRC within a half ounce.) Along with the captive small parts, that's a win/win.