1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

Sherlock Speaker-Mate / Possible Solution?

Discussion in 'Amps and Cabs [BG]' started by Solarmist, Sep 17, 2008.


  1. Is there an easy solution to wanting to use two [2] 4ohm cabs using an amp that runs a 4ohm load with two outputs [GK-RB/BL series]. The two cabs together add up to a 2ohm load, and I was wondering if the Sherlock Speaker-Mate5 is a possible solution?

    http://www.sherlockaudio.ca/
     
  2. Rick Auricchio

    Rick Auricchio Registered Bass Offender

  3. I am also interested in the Sherlock Speaker Mate.

    It seems that the box Bayou makes would actually only
    help if you were hooking 2 8 ohms to get a 4 ohm load, or taking 2 4ohms and making them an 8 ohm (big loss of amp power).
    I am more interested to use 2 4 ohm cabs which many amps will not allow a 2 ohm load.

    The Sherlock Speaker Mate claims to allow connect multiple 4ohm cabs and have the amp still have a 4 ohm load...
     
  4. billfitzmaurice

    billfitzmaurice Commercial User

    Sep 15, 2004
    New Hampshire
    Owner, Bill Fitzmaurice Loudspeaker Design
    Only with four cabs. The only options with two 4 ohm loads are 2 and 8 ohms.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.