1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)


Discussion in 'Amps and Cabs [BG]' started by MODNY, Sep 12, 2005.

  1. MODNY

    MODNY Guest

    Nov 9, 2004

    my eden navigator should be arriving shortly, but i'd like to get to know her a bit more until then..

    i've never seen the back panel of one of these babies before either, so some of those would be nice aswell

    thanks everyone!!!
  2. I did this just for you!

    (click for REALLY big)
    [​IMG] [​IMG]

    I got the Navigator as the first step in replacing the Metro that I love, but is just too heavy to be as mobile as I'd like. I'm hopefully going to go with a Navigator into a QSC PLX1602 into an Epifani UL310. I hope I can get tone close to my Metro, but a little different (it's all in my head!).
  3. MODNY

    MODNY Guest

    Nov 9, 2004
    just wondering..

    which one of those outputs in the back goes to the power amp???
  4. Chef

    Chef Moderator Staff Member Supporting Member

    May 23, 2004
    Columbia MO
    Staff Reviewer; Bass Gear Magazine
    NS: I'm running my Nav into a WSC/PLX 1602, then to a schroeder 410 or 1210 depending on venue size. It works really really well.

    MODNY: there are left and right outs on the Nav...you can run stereo with crossover adjustment (low freq to one v\cab, higher to another), or biamped and use the biamp controls to bias mix more to one cab or the other...the owners manual can be downloaded from eden electronics website.