1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Show your rigs assembled in your country using globally sourced components

Discussion in 'Amps and Cabs [BG]' started by GearHeadBassMan, Apr 27, 2009.


  1. Here's a new game! Show your giggable rigs with amps / cabs / combos that are assembled in your country of origin!

    I don't have a real picture of my rig right now, but, as an example:

    Hamer Velocity 1 Bass
    Sansamp BDDI
    Carvin HD900 Power amp
    Avatar B410 neo

    all made in the good ole' USA!

    Lets hear one for patriotism!:hyper:
     
  2. stop ruining my fun bob! :)

    then, show your "assembled in (your home country) rigs" it is!
     
  3. iScott

    iScott

    Jun 13, 2007
    Decatur, GA
    Interesting.
     
  4. Papazita

    Papazita

    Jun 27, 2008
    Ohio
    Hamer Velocity is made in Korea.
     
  5. not the original, or at least, mine. under the electronic cover is the serial number and "made in USA"

    it's an oldie but a goodie. will prove with pictures tomorrow when i visit the rig.
     
  6. Baird6869

    Baird6869 RIP Gord Downey. A True Canadian Icon.

    I live in Canada and prefer not to use Yorkville/Traynor (although the YBA-200 is a good sounding head).

    I own a Dingwall bass though!:D

    I likely own more MIA gear than most american TBers.:bag::D

    2 MIA heads
    3 MIA cabs
    5 MIA basses
     
  7. jarrod cunningham

    jarrod cunningham

    Apr 24, 2007
    sylacauga alabama
    spector basses
    not mine , of course , but it doesnt get any more patriotic for the good ole usa ....

    SVT.
     
  8. rbonner

    rbonner

    Sep 25, 2008
    Sorry, I was cranky at the time. :rollno: Musta took it out on your thread. BOB
     
  9. cacio

    cacio

    Apr 24, 2005
    Italy
    i got mesa amps-Can I post a made in your country amp?
     
  10. chadds

    chadds

    Mar 18, 2000
    Did you say every part? Diode, jack, resistor? You might not own such a thing.:bawl:
     
  11. joegeezer

    joegeezer

    Mar 9, 2005
    Northern Wisconsin
    Avatar Club#12 Eden Club Lucky# 13--USA Peavey Club#37 Carvin Club#5
    [/ATTACH][/ATTACH]

    Pearson Rack, California.
    Sabine Tuner, California
    Eden WT-330, Minnesota
    Carvin DCM2500,California
    2-Avatar 410Neo's, Washington, State for the boxes,
    and Tennesee for the drivers.

    Also a Peavey Fury USA, and a Peavey Foundation 5 USA

    All rockin' the USA, as long as I can make my old body get'r done.
     
  12. RickenBoogie

    RickenBoogie

    Jul 22, 2007
    Dallas, TX
    Mostly by coincidence, All 3 of my basses are US made, and all 4 of my amps are as well. Pedals though, that's another issue, but I do gig a small board with both Chinese and Japanese made pedals. Swedish too.
     
  13. Jeff Scott

    Jeff Scott Rickenbacker guru.......... Supporting Member

    Apr 11, 2006
    Once I get my new Dr. Bass cab I will make some photos, but in the mean time:

    '67 Rickenbacker 4005WB JG (Feb)
    '73 Rickenbacker 4001 MG (March)
    '73 Rickenbacker 4001FG (July)
    '98 Rickenbacker 4001V63 FG (April)
    '08 Rickenbacker 4003JPSVP JG (May)
    '99 Zon Sonus 5/1 fretless passive/spalted maple top
    '05 Rick Turner RB4FL
    '97 Fender California Precision Special
    Peterson Stroboflip
    '01 Walter Woods Super
    Dr. Bass custom 2-12 cabinet (once delivered)
    Custom EV B-110 cabinet
    Monster Cable instrument cables
    Audioquest speaker cables


    If we can include guitars:

    '61 Gretsch 6117 Double Anniversary
    '67 Rickenbacker 330 FG (March)
    '98 Rickenbacker 360V64 FG (August)
    '03 Larrivée LV-19 with vine inlays on fingerboard, headstock and bridge
     
  14. alembicguy

    alembicguy I operate the worlds largest heavey equipment Supporting Member

    Jan 28, 2007
    Minnesota

    Arent these made in Vietnam?
     
  15. Rick Auricchio

    Rick Auricchio Registered Bass Offender

    I presume you're ignoring the fact that virtually all the components (resistors, capacitors, semiconductors) are made in Asia.
     
  16. me too.....1 ric,mesa 400+,ph610,ampegv4b,peavey tko 80,micro bass......3 canook 1x15 cabs made right here in siberia......back in the day i had a garnet........skeleton in the closet..ace tone bass 6
     
  17. KingCrimson

    KingCrimson

    Oct 6, 2008
    I'm from Canada, does a commonwealth amp count?

    bassstack-1.

    made in UK ashdown mag300 head

    Yorkville 410b and 115b, made in Canada


    Hey we still technically have to get our laws passed by the queen so.....:D
     
  18. fdeck

    fdeck Supporting Member Commercial User

    Mar 20, 2004
    Madison WI
    HPF Technology LLC
    Her Majesty's picture is on your currency, so I guess it's fair game. :D
     
  19. fdeck

    fdeck Supporting Member Commercial User

    Mar 20, 2004
    Madison WI
    HPF Technology LLC
    Does it count if all of my gear, and the music that I play, were invented in my home country?
     
  20. yeah, but our dollar is called a loony
     

Share This Page