1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Slot port alternative?

Discussion in 'Amps and Cabs [BG]' started by Dean_CustomJazz, Aug 21, 2002.

  1. Dean_CustomJazz

    Dean_CustomJazz Guest

    Jan 23, 2002
    I am building a 1x15 cab now (very slowly i might add) and I am using the exact dimensions of the swr workingmans 1x15. I find myself lacking the equipment to make a slot port in the front. What could I possibly do in place of the slot ports, where, and what size? by the way, for info. on the cab, just use the exact dimensions of the swr workingmans 1x15.
  2. You should match the cabinet to the driver you plan on using. If your driver is the SWR driver that came from that cabinet, you can use the same tuning frequency. Port shape isn't much of a factor, but the frequency is.

    If your driver is an off the shelf model, such as an Eminence, you should match the cab and driver.

Share This Page