1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

squire jazz bass wiring / seymour duncan / cts pots

Discussion in 'Pickups & Electronics [BG]' started by jardis1, Mar 7, 2013.


  1. jardis1

    jardis1

    Sep 1, 2012
    Hi -
    I got seymour duncan pickups and a wiring kit with cts pots from stew macdonald. the wiring diagrams aren't quit the same. for ex, s.d wiring shows the jack as having a ground. s.m. shows jack connected with both connections to the tone pot.
    which do I follow? thanks for any advice...John
     
  2. audioglenn

    audioglenn

    Jul 14, 2012
    Pennsylvania
    Either one of those diagrams will work.
     
  3. Cadfael

    Cadfael

    Jan 4, 2013
    Germany, EU
    Hi John,

    my 424 pages wiring diagram contains about 20 "standard" JB wirings!!!

    The original 1963 JB had the GND via controlplate, so only one wire at the jack!
    You can wire GND from the jack to the pot housing.This gives a "more secure" grounding. You mustn't bur you can ...

    The wiring of the capacitor at the tone pot also differs. But they all work ...

    "There is more than one way to Rome" ...
     
  4. jardis1

    jardis1

    Sep 1, 2012
    thanks guys
     

Share This Page