Dismiss Notice

Psst... Ready to join TalkBass and start posting, make new friends, sell your gear, and more?  Register your free account in 30 seconds.

Stewart 1.2 at 2 ohms medium volumes, o.k.???

Discussion in 'Amps and Cabs [BG]' started by Mcrelly, Aug 4, 2004.


  1. Mcrelly

    Mcrelly

    Jun 16, 2003
    Minnesota, USA
    I have a stewart 1.2 and have been running 2 aguilar gs112 bridged (4 ohms total) and am wondering if anyone has run four 8ohm cabs bridged through a 1.2 stewart without problems or with problems????

    or could I run three 8ohm cabs from a bridged 1.2??

    YES I SEARCHED.....A BIT :p
     
  2. inazone

    inazone

    Apr 20, 2003
    Colorado
    nope. You can run 2ohm a side or 4ohm bridged is all. I had a 1.2 and never had any problems with it, its a good amp.
     
  3. Don't go below 4 ohms bridged.

    Even at 4 ohms, a World 1.2 will go into thermal shutdown if you push it hard or if it's in the hot sun or if it's running on low voltage (long extension cord).

    The amp will recover, but it screws up a gig.

    Aloha,

    Jonathan
     
  4. Mcrelly

    Mcrelly

    Jun 16, 2003
    Minnesota, USA
    thanks for the replys. I guess if I have to play with four cabs I'll put two 8ohm cabs on each side.