Dismiss Notice

Psst... Ready to join TalkBass and start posting, make new friends, sell your gear, and more?  Register your free account in 30 seconds.

SWR Workingman404 question

Discussion in 'Amps and Cabs [BG]' started by XxBlackOrchidxX, Apr 25, 2004.


  1. XxBlackOrchidxX

    XxBlackOrchidxX

    Dec 23, 2003
    there are 2 fuses in the back...what are they for ?
     
  2. BillyB_from_LZ

    BillyB_from_LZ Supporting Member

    Sep 7, 2000
    Chicago
    What is marked near each fuseholder?
     
  3. BillyB_from_LZ

    BillyB_from_LZ Supporting Member

    Sep 7, 2000
    Chicago
    According to the owner's manual...which can be found here:

    http://www.swrsound.com/products/ownersmanuals/wm4004_om.PDF

    There is an AC line fuse that opens if there is a circuit failure within the amplifier and a speaker fuse to protect the amp if a speaker cable shorts out.

    If you don't have one already, it's always a good idea to obtain a copy of the amp's owner's manual and read through it.

    The WM 4004 manual also provides some suggested settings which might prove to be helpful...