T-40 Phase Switch Question

Discussion in 'Pickups & Electronics [BG]' started by capnjagg, Feb 12, 2021.

  1. capnjagg

    capnjagg Supporting Member

    Feb 29, 2012
    Moreno Valley, CA
    Hey dudes, so I’ve posted before about an issue I have with my T-40, basically the bridge pickup only works with the pickups out of phase, but not in phase. It’s a post-Chip model with the blade humbuckers, so I suspect it’s that stupid dimple on the cover (when I push down reeeaaally hard on the cover I can sometimes get the pickup to work in phase).

    So now my question is, since the pickup works out of phase, and I never use the phase switch for anything anyways, is it possible to just swap the two leads on the switch to get my pickup working in phase, or is this just going to reverse the options on the switch?

    Thanks in advance

    4DC26931-A3EF-4BC3-8FF9-50F8F62D67F7.gif 999F8E23-1608-4671-9DEE-7F13F17415FD.jpeg AD621E64-F905-4FAA-BD1B-5EEA2FDECDC5.jpeg