1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Tascam CD-BT1

Discussion in 'Miscellaneous [BG]' started by Arnold, May 10, 2004.

  1. I love this thing, I'm wondering if anybody has figured an easy way to use play-along CD's i.e. Abersold, Jamerson, as far as the balance control (right, left) goes. Thanks. ASG
  2. Get a cable that is a stereo 1/8" male on one end and separate left and right channel RCA connectors on the other. You can leave the left channel unplugged, which will give the effect you are seeking (removing the bass so you can supply your own line). If you need to go back into a 1/8" plug on the other side, also pick up a dual female RCA to stereo 1/8" cable, these are usually only two or three inches long. If you need to go into a 1/4" jack, RCA to 1/4" converters are easy to find. This will work with the CD-BT1 or any CD player with a line out or headphone out (start with the headphone output turned down, some are pretty high output). Hope that helps...