TC BG250 Combo - Head conversion

Discussion in 'Amps and Cabs [BG]' started by Zeb_Darroch, Dec 28, 2014.

  1. Zeb_Darroch


    Dec 28, 2014
    Hi guys, I'm in the process of trying to convert my BG250 1x15" into a head. The actual amplifier came out easily enough (only a few screws holding it in place) but now I'm a little bit stuck on all of the soldering:

    The speakers that were originally in the combo connected to the head with a little two pin connector: (Letter C connected to the two pins on a motherboard in the amp)

    Now I'm not sure exactly what I need in order to wire some speaker out sockets to this?
  2. Snowtoy


    Feb 5, 2015
    Hey I just ran across your your site. Did you ever figure this out and if you did let me know. I saw a neurtriks speaker connector that you could add to the back side maybe adding another metal plate and the connector on the back of the amp sort of like the bg250 208 set up. Do you know if the bg250 is a 4 ohms head.