/ Register

The "cups" on top of cabinets?

Discussion in 'Amps and Cabs [BG]' started by uaudio, Jan 13, 2009.

  1. Jan 13, 2009 #1
    uaudio

    uaudio

    Apr 11, 2008
    Arizona
    A friend has a SVT-410HLF and is getting rid of the SVT-VR on top of it. Right now the feet of the VR head fits nicely in those cup things (please tell me the correct term) on top of the cab, and the head never moves around. They're nice.

    With his new head, the feet don't really fit in the cups. They kind of get in the way of how he'd like to line up the head on top of the cab, and make the overall setup kind of wobbly. Is there a way to remove these temporarily and/or fill them with something to stop the head from moving around?
     
  2. Jan 13, 2009 #2
    Sundogue

    Sundogue

    Apr 26, 2001
    Wausau, WI
    Screw/Silicone/Double-Sided Tape rubber feet onto the bottom of the new head. You may need to put them in a different location (further in?) to avoid the cups on the cab.

    You can get rubber feet at any hardware store of all different sizes and thicknesses.
     
  3. Jan 13, 2009 #3
    anderbass

    anderbass

    Dec 20, 2005
    Phoenix. Az.
    If he decides to just try something simple, I'd think a black rubber mat (cut to size) would work and look nice.
     
  4. Jan 13, 2009 #4
    Johnny Mack

    Johnny Mack Guest

    Jun 8, 2007
    Englewood, FL
    take the feet off the amp. unless the fan vent is on the bottom.
     
  5. Jan 13, 2009 #5
    uaudio

    uaudio

    Apr 11, 2008
    Arizona
    Thanks for the help. I'll pass the info along.
     
  6. Jan 13, 2009 #6
    BassmanPaul

    BassmanPaul Inactive

    Aug 25, 2007
    Scarborough Ontario Canada
    You are quite correct Sir! Cop thingies is the proper term. ;)

    Paul
     
  7. Jan 13, 2009 #7
    ninerfan

    ninerfan

    May 28, 2006
    North San Diego
    Getting rid of the VR and keeping the HLF?!?!?!?!?:meh:
     
  8. Jan 13, 2009 #8
    uaudio

    uaudio

    Apr 11, 2008
    Arizona
    Its been...problematic. I'll leave it at that.