1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Trace AH200...Rack

Discussion in 'Amps and Cabs [BG]' started by oneoftheway, Aug 10, 2005.

  1. oneoftheway


    Nov 27, 2002

    I know there are a couple of guys around here that use these heads and I was just wondering how you rack mount them and what rack you use.
    They seem to have to mounts on the back of the head as opposed to the front on the sides...
    Will any rack still mount it ok?

    Thanks for all the help!
  2. Antonius


    Nov 26, 2002
    The extensions on the back are just there for protection of heat sinks, power switch and generally anything plugged in to the back. There are separate "ears" which were supplied with the amp that can be screwed to the front (threaded holes on both left and right side, near the front). If you bought your AH200 used, chances are that a previous owner somehow lost the ears. Perhaps some general purpose ears can be made to fit, or make your own from some L shaped metal.