1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

trace elliot set up

Discussion in 'Amps and Cabs [BG]' started by basspunk2005, Feb 9, 2005.

  1. basspunk2005

    basspunk2005 Guest

    Jan 31, 2005
    now i need to know from people who have had similar set ups if this will work ok, i have a trace elliot ah300-7 going into a trace 4x10 and im thinking about putting a trace 2x10 with it. the 2x10 is only 200watts so i am at any danger of blowing it when playing.(obv im not gonna crank the volumes so it blows)
  2. Kelly Lee

    Kelly Lee Yeah, I'm a guy! Supporting Member

    Feb 17, 2004
    Marana, AZ, USA
    No you will not blow the cab as long as you don't push your amp into clipping.
  3. IvanMike

    IvanMike Player Characters fear me... Supporting Member

    Nov 10, 2002
    Middletown CT, USA
    as long as both of those cabs are 8 ohms you should be fine. IIRC, that head is only stable to 4 ohms, so 2 8 ohm cabs is it for that head.