1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Tweeter CRACKLE!!!

Discussion in 'Amps and Cabs [BG]' started by PollyBass, Feb 2, 2002.

  1. PollyBass

    PollyBass ******

    Jun 25, 2001
    Shreveport, LA
    Ok, my tweeter, at high volumes, is "crackling", sort of like a glassy crackle. imagine a marble in a glass vase swinging around. Can i fix it? Like replace that,,,uh,,,that thingy.....God, got to get over this hangover......
  2. notduane


    Nov 24, 2000
    t-6005377.   :p

    You're talkin' about the Peavey 4x10TX you're drivin' with
    a Crate BT-350 right?

    Does that crackle only happen at high volume or is it now
    a permanent thing? If it's permanent, you may need to replace
    the tweeter.

    The Peavey site appears to be down at the moment. There
    were a number of reviews of that cab tho at the B.G.R.A.
    One mentioned that the "horn" (tweeter) is a 150 watt Fostex
    will an L-pad attenuator. Maybe when your playin' loud, crank
    that L-pad for more attenuation?

    If it were me, I'd rip the dang thing out...a tweeter in a BASS cab?!? :rolleyes:
    Put a tuned port in the hole :D.
  3. PollyBass

    PollyBass ******

    Jun 25, 2001
    Shreveport, LA
    Thanks for the alka man, i needed that. any way. do i replace the whole horn? i noticed that it does seem to "SWISH" When i turn up the tweeter. does it need a WHOLE new tweeter? or just a new,,, thingy GOD IT WAS IN THE NEW BASS GEAR MAG. i forget, but it does make alot of noise. i need that tweeter for that sweet finger release "Whump"....
  4. notduane


    Nov 24, 2000
    "Driver" maybe? :D

    The horn/tweeter body should be o.k. If anything needs replacin',
    it's probably the driver. If you got the cab new, you should be
    able to take it to a Peavey service center -- click. Be sure to
    select "Service Center" (vs "Dealer") before executing a search.

    Maybe you could ask them for one with better power handling? (j/k! :) ).

    Here's the P/V spec sheet (PDF :( )...http://www.peavey.com/media/pdf/manuals/80301559.pdf

Share This Page