Well, not exactly. I'm gonna let a couple of these go. It's up to TB which ones do. If you have any questions, concerns or would like specific photos of these instruments, PM me and I will get back with you in a timely manner. Hamer Chaparral 12 string (Korea) Body: Mahogany Neck: Maple Fingerboard: Rosewood Scale length: 34" Neck Pickup: EMG DC35 Bridge Pickup: EMG-X DC35 Preamp: EMG BTS (Vol, Pan, Bass, Treble) Chrome hardware including Schaller strap locks Weight is approx. 9lbs. Overall the bass is in good condition with a couple of exceptions. There are a couple finish cracks under one of the knobs (see pics) and the nut cracked, but has been repaired. It's currently strung with a fresh set of D'Addario Nickels. It will be shipped in the original hard shell case. Asking $650.00 shipped in the Contl. U.S. Thanks. Additional pics: Hamer Chaparral 12 string Roscoe LG 3005 Body: Figured maple top with a spanish cedar back Neck: Maple/spalted purple heart Scale length: 35" Fingerboard: Spalted purple heart fingerboard Black Hipshot hardware (tuners, bridge) Schaller straplocks Preamp: Nordstrand 3B-4a 3 band bass preamp with volume/volume stack, tone (pull passive), mid (pull frequency switch), and treble/bass stack Pickups: Roscoe Barts (Bartolini) Red Sims LED side dots and 12th fret inlay Weight: 9lbs. Overall, it is good shape. The neck has some mojo in the money position. There is a small ding on the back of the body, a small one on the front and some surface scratches in the 'pop' area next to/below the fingerboard. It will ship in a hybrid hard shell case. Asking $2400.00 TRADE PENDING shipped in the Contl. U.S. Thanks. 1975 Fender Precision Neckplate #610696 Potentiometer date code: 1377429 Weight is approx. 9lbs. Hipshot Bass Xtender added. I loaned this bass to a friend a couple of years ago and unfortunately the tuner was lost. The pickguards and bridge ashtray are replacements. A couple of pickguard screws look to be replacements too. Frets are in good shape. It's currently strung with a set of D'Addario Chromes. When I removed the neck for photos, I checked the truss rod and it works fine. Recently, some of the paint has flaked off of the upper horn. I added the brass thumbrest a couple of years ago. The bass comes with both the red tort and black pickguards. It will be shipped in a non original hard shell case. Asking $1600.00 SOLD!!! shipped in the Contl. U.S. Thanks. Zon Sonus Special 5 Body: swamp ash with Bubinga top, hi gloss finish Neck: Composite, bolt-on (no truss rod) Scale length: 34" Fingerboard: Phenowood Preamp: Bartolini (Vol, Pan, Bass/Treble) Pickups: designed for Zon by Bartolini Chrome hardware: Zon brass bridge, Gotoh GB-7 tuners, Schaller strap locks String spacing .687"/17mm Weight: 9.8lbs. This one was built in the mid nineties, however, I recently sent it to Zon for some updates. It sports a current Zon bridge and the control layout was changed from Vol/Vol to volume and blend. The Volume pot, when pulled, bypasses the pre. The neck specs are a little different from the current versions. Width at the nut is 1.734" (1.875" per website). Width at 24th fret is 2.760" (2.875" per website). There are a few nicks in clear coat on the headstock and a couple small nicks by the control plate, but otherwise it looks great. The frets (1-7) show some wear, but still play fine. It will be shipped in a hybrid hard shell case along with the original Zon gig bag. Asking $1700.00 SOLD!!! shipped in the Contl. U.S. Thanks.