I always wanted to try one of these and it delivers in spades but I have a number of other pedals that get close enough to the sound. If you want to go with a no amp setup or used as a standalone recording rig this works like a charm and produces clear, organic tone. Run in your signal chain it provides an unmatched amount of headroom and power. Very good condition, functions perfectly, no velcro, chassis has some paint chipping as pictured, comes with power supply, original packaging not included. Sounds amazing and packed with practical features. User manual can be viewed here le_preamp_series:le_preamp_series_user_s_manual [User's manuals] Le Bass With Le Bass Preamp Pedal, the ultra clean Channel A is perfect for today’s modern techniques with lightning fast response and a full spectrum of tone. Channel B tips its hat to the foundation of rock bass with solid punch and a sweet break up available when things get down and dirty. Cold Fusion lets you live in the limelight with the best of both worlds while Hot Fusion lets you take center stage with searing bass from a focused distortion to synth-like growls. Tube Ruby 12AX7AC5 HG Tone control A channel : Passive Bass/Treble tonestack B channel : Passive Bass/Treble tonestack – Active Mid/Sweep control – Gain : -18 to +6 dB – Freq : 220Hz à 1.5kHz Input / Output Input : Jack 6.35 mm unbalanced (TS, Tip/Sleeve) – Impedance : 1 MOhms Return : Jack 6.35mm unbalanced (TS) – Max input level : 17 dBu – Impedance : 2,2 MOhms – Unbuffered, directly connected to Output when active Output : Jack 6.35 mm unbalanced (TS) – Max output level : 11 dBu – Impedance : 300 Ohms Thru : Jack 6.35 mm unbalanced (TS) – Unbuffered, directly connected to Inpu Send : Jack 6.35 mm unbalanced (TS) – Max output level : 11 dBu – Impedance : 300 Ohms DI Output : XLR, balanced – Impedance : 600 Ohms – Max output level : 10 dBu Phones : Jack 3.5 mm stereo (TRS, Tip/Ring/Sleeve) Power Mains power adaptor DC Jack 2.1mm, negative center Input voltage : 12V DC Power consumption : approx. 6W Current draw : 500mA Dimensions & weight Width x depth x height: 124 x 189 x 50 (mm) – 4.88 x 7.44 x 1.97 (in) Weight : 750g – 1.65 lb PayPal / USPS Priority shipping included NO shipping outside the CONUS PayPal / questions: edbocchino (AT) gmail (DOT) com Thanks for looking!
id like to sell it outright but will trade for a DSM Noisemaker OmniCabsim Deluxe V2 thats the only thing im after atm, thanks