1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

USACG Jazz Neck - Finished by MJT - Ebony on Maple - 21 Frets

Discussion in 'For Sale: Parts, Strings, and Accessories' started by Jhonnybass, Jan 14, 2014.

Thread Status:
Not open for further replies.
  1. Jhonnybass

    Jhonnybass Supporting Member

    SOLD - This is a loaded neck that I ordered for a parts bass that I was building. Unfortunately ebony just doesn't do it for me so I'm letting this neck go. USACG makes really great necks and the guys at MJT applied a light relic on this baby! I'll let the pictures do the talking. I applied a "you know who" p-bass decal (it was for a pj project) after I received the neck but it's easily removable if you don't want it. I also temporarily installed a drop d tuner that didn't match the screw hole pattern of the schaller tuners on there so there are 4 extra small drill holes at the back of the headstock where the E tuner goes.


    1/4 sawn maple neck - Ebony FB
    21 Frets
    J Width
    .830 "C" Shape (in between a Jazz and p-bass - feels awesome)
    10"-12" compound radius
    6125 fretwire (just a bit taller than vintage frets but smaller than medium jumbos)
    Cream inlays
    White Side Dots
    Thin Nitro Finish
    Over sprayed back
    Schaller BML tuners relicd by MJT
    String retainer included (all parts)
    White Graphtech nut

    I'm asking for $300 plus shipping to Canada or the US. Paypal only

    Attached Files:

  2. Jhonnybass

    Jhonnybass Supporting Member

    More pics

    Attached Files:

  3. Jhonnybass

    Jhonnybass Supporting Member

    and more...

    Attached Files:

  4. Unchain

    Unchain I've seen footage.

    Jun 20, 2005
    Tucson, AZ
    Sweet neck, I wish I could take it off your hands. Free bump.
  5. Dave W

    Dave W Supporting Member

    Mar 1, 2007
    White Plains
    It's a 10"-12" compound radius?
  6. Jhonnybass

    Jhonnybass Supporting Member

    Yeah 10"-12". All it means is that lower on the neck there is a traditional FB radius and as you get higher the FB starts becoming a bit more flat. This helps a lot if you like really low action and it gives the neck a bit more of a modern feel. Fender does it on their newer basses
  7. Jhonnybass

    Jhonnybass Supporting Member

  8. Jhonnybass

    Jhonnybass Supporting Member

    and SOLD! Neck is going to IDAHO :hyper: Thanks talkbass!

Thread Status:
Not open for further replies.