Dismiss Notice

Ready to join TalkBass and start posting, get alerts, sell your gear, and more?  Register your free account in 30 seconds.

Voodoo labs ISO 5 install on a pedal train jr.

Discussion in 'Effects [BG]' started by DaveDub, Dec 26, 2013.


  1. DaveDub

    DaveDub

    Nov 17, 2013
    Has anyone had any experience with this install? Curious if the included brackets fit the ISO5 the same as the pp2+ ?
    Any suggestions for an easy install if not the same as the pp2+?
     
  2. RickenBoogie

    RickenBoogie

    Jul 22, 2007
    Dallas, TX
    The brackets will work fine.
     
  3. Register_To_Disable

  4. Little off topic, but I have a few things installed under my PT-2 in addition to my PP-2. I use plumbers strapping with electrical tape wrapped around for protection. Strapping is held on with short #8 round head(or wafer) screws. Just drill some pilot holes slightly smaller than the screws first. Works great-very secure and frees up board space. ImageUploadedByTalkBass1388107883.879836.jpg
     
  5. 10cc

    10cc

    Oct 28, 2013
    Does anybody know if the iso 5 fits under a Pedaltrain Nano+? I'm sure this has been answered but I can not seem to find it. Thanks
     
  6. jumblemind

    jumblemind I also answer to Bryan Supporting Member

    Aug 27, 2011
    Knoxville
    Yes, they work the same. I have installed an ISO5 on a PT Jr before.
     
  7. jumblemind

    jumblemind I also answer to Bryan Supporting Member

    Aug 27, 2011
    Knoxville
    No. There is not enough clearance with the stock feet on the Nano+. Some people have replaced the feet or added to them for extra clearance for things like a Fuel Tank Jr. However, even with the extra height clearance I don't think there would be enough horizontal space for the cables and power cord of the ISO5 without cutting the metal of the nano frame.
     
    10cc likes this.