1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

SOLD Voodoo Labs PP2+ Pedal Power 2 Plus

Discussion in 'For Sale: Effects and Pedals' started by Fro 20, Nov 19, 2016.

  1. Fro 20

    Fro 20

    Feb 23, 2009
    Buffalo, New York
    New York
    90 shipped CONUS paypal


    Photo on 11-19-16 at 7.44 PM.jpg

    Photo on 11-19-16 at 7.14 PM.jpg

    The first photo is what the top face of a PP2+ is supposed to look like. The next two are of my unit which was mounted from the day I bought it onto the underside of my pedalboard with super strong industrial strength velcro. When I peeled it off it left a thin layer of foam residue and obscured some of the labeling. I will include a stock PP2+ description at the end of this ad for those who don’t know what a PP2+ is. The unit works fine.

    included are 8 cords of varying lengths, including some real beauties like this
    Photo on 11-19-16 at 7.33 PM.jpg

    that I made for extensions. I know i knowiknowiknwoiknow but they do work. Also is one of these

    Photo on 11-19-16 at 7.32 PM.jpg

    which i believe is a daisy-chainer.

    Also included is one of those for bridging 2 outputs to power an 18v pedal, and an AC cord. There is no box or manual

    all of this Fugliness is reflected in the price

    The beauty of the Power 2 Plus: all of the power outputs on this baby are completely isolated from each other. This means that you'll encounter no tone loss or power drain between different devices. With a Voodoo Lab Pedal Power 2 Plus powering your pedalboard, you can know that your outboard FX are running their best and most balanced. Moreover, you'll know that your rig is safe from unexpected surges or any "dirty" power you might find out there.

    3 Different Sections
    You'll notice that the front panel of the Pedal Power 2 Plus is divided in ACA, L6, and SAG sections. The 4 outputs in the ACA section each deliver 100mA appropriate for 9V battery-operated pedals. These can also power Boss pedals that require the ACA adapter and operate at 12V. Just flip the switch on the bottom of the Power 2 Plus to change from 9V to 12V on any output!

    The "L6" section refers to Line 6 units, and delivers the 250mA that will allow you to run devices like the Line 6 DL4 Delay Modeler. Standard 9V effects will run from these outputs as well, if you like.

    The 2 x Battery SAG Control outputs each offer 100mA of power, but also allow you to "SAG" the voltage from 4V to 9V. This feature can be enabled via the bottom panel switches. This feature is there for the most die-hard tone freaks, allowing you to experiment with the power input behind your distortion pedals, to simulate the "dying battery" tones that so many guitarists swear by.

    Ground Loops, Begone
    Most of the noise and hum musicians encounter onstage or in the studio is caused by ground loops. With its isolated outputs, the Voodoo Lab Pedal Power 2 Plus breaks unwanted ground paths before they even form.

    9 Isolated Outputs
    Meanwhile, the Pedal Power 2 Plus employs a specially designed, ultra-low noise toroidal transformer. By placing separate balanced windings on each of the 9 outputs, the Pedal Power 2 Plus eliminates the magnetic field noise caused by most standard "wall wart" power adapters.

    No More Noise or Hum
    Any power supply can only be as good as its own power input, right? The exceptionally clean sound you'll hear coming from the Voodoo Lab Pedal Power 2 Plus owes to its use of an audiophile-grade linear power supply that prevents the transient noises and hum caused by standard "switching" transformers.

    The Voodoo Lab Pedal Power 2 Plus is handmade in the U.S.A. and comes complete with connection cables, a detachable AC power cord, and a 5-year warranty.

    -6 x 9VDC 100mA and 2 x 9VDC 250mA regulated sources
    - SAG outpour section with controls for power sagging distortion units
    - Ultra-low noise toroidal transformer
    - Four selectable outputs for Boss ACA units
    - Two selectable outputs for Line 6 units
  2. Fro 20

    Fro 20

    Feb 23, 2009
    Buffalo, New York
    on hold
  3. Fro 20

    Fro 20

    Feb 23, 2009
    Buffalo, New York

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.