{} $1450 shipped within Continental US, PayPal only * Warmoth Black Korina chambered P-Bass body * Modulus 21-fret J-Bass Graphite neck (1.5" nut) (with truss rod) * 2Tek bridge * 18V EMG-X MusicMan pickup, with Volume knob push/pull between HB and single coil * 18V EMG BQC 3-band preamp: stacked Midrange for frequency selection and cut/boost, stacked bass/treble cut/boost * Modulus hard-shell case * Very recently setup by my luthier, the neck has incredible buzz-free action * Trim plate for 2Tek bridge is included, I purchased it but never installed * 9.6 lbs on my bathroom scale * The bass has never left my house and is in near-mint condition, but I included a picture that shows a closeup of the small nick on the upper horn, below and to the left of the strap knob For what it's worth, I've owned a number of Modulus Quantum basses over the years and would honestly take this one over any of them {} {} {} {} {} {} {} {} {}
Does that neck fit the neck pocket? Looks a bit off to me. But, a very cool looking bass. What's the scale length?
Besides a post above raising concern that something is "off" with the heel, I also received a PM from someone saying he thought the strings are all too far to the right, as if the heel were crooked. When I took the pictures, I was moving all around the house to reduce glare, and in the pics above there was a window to the right and I angled the camera to the left, perhaps creating an optical illusion that the strings are off? Warmoth and Modulus would not create Fender-licensed products that would result in a bad joint. Here are a couple of pics taken of the string spacing straight-on: {} {}
Here are some related products that TB members are talking about. Clicking on a product will take you to TB’s partner, Primary, where you can find links to TB discussions about these products. Browser not compatible
