What are these mic clips? Ampeg SVT

Discussion in 'Live Sound [BG]' started by Maxfenderbass, Nov 27, 2019.


  1. Hey everyone, I am going to be micing my 810 going forward and often I see these clips on large amp set ups live. This is Timmy C's set up and can't for the life of me find these mic clips/mounts.
    Any ideas?
    cjztqyguoaafbpa-jpg.jpg
     
    WayneP likes this.
  2. promdates

    promdates

    Jun 2, 2019
    Slidell, LA
    jimfist likes this.
  3. Paulabass

    Paulabass

    Sep 18, 2017
    I've used the Audix cab grabber with some success. It doesn't fit all cabs (not deep enough for a lot of cabs), and once we traced a low frequency resonence thru the P.A. to it.
    Most Long and McQuade stock it, or can get it quickly.
     
  4. BwanaDust

    BwanaDust Inactive Commercial User

    Apr 11, 2019
    Pittsburgh, PA
    Lincoln Learning Solutions - Lincoln Park Performing Arts Center
    Only thing I don't like about those clips on a bass cab is they tend to transfer all the rumble and vibrations through the mic.
     
    byacey likes this.
  5. kalle74

    kalle74

    Aug 27, 2004
    As mentioned above, that is a Z-Bar. A viable option if you pad the part between you amp and cab (to keep the structural noises in check, and to help it stay in place. Audix cab grabber is good, too.
     
  6. 12BitSlab likes this.
  7. Primary

    Primary TB Assistant

    Here are some related products that TB members are talking about. Clicking on a product will take you to TB’s partner, Primary, where you can find links to TB discussions about these products.

     
    Dec 6, 2021

Share This Page