1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

What impedance cabinet would i use with a Laney RBH800 300 Watt head unit?

Discussion in 'Amps and Cabs [BG]' started by aabassist, Nov 4, 2002.

  1. Would i use a 4 Ohm or 8 Ohm cabinet?

    Also is it wise to use cabinets made by a different company than the head unit?
  2. Also i was wondering if anyone knows how many cabinets this head can output to. Does it have

    two, 4 Ohm Outputs?? or one, 4 ohm output?? any help appreciated
  3. JMX

    JMX Vorsprung durch Technik

    Sep 4, 2000
    Cologne, Germany
    You get the most power @ 4 ohm, so you want to use one 4 ohm cab or two 8 ohm cabs.

    It's perfectly fine to use different brands, most people do that.
  4. I was looking at a Peavey 115BVX 1x15" Cab, this is available as 4 Ohm and 8 Ohm for the same price. So i would buy the 4 Ohm version right??

    Would that be suitable for this head unit? (Laney RBH800)

    Also i was wondering about frequency response, do i have to check this??

    The Peavey is:
    Frequency response: 30 Hz to 3.5 kHz

    Would that be compatible with the RBH800??

  5. Matthias


    May 30, 2000
    Vienna, Austria
    If you are sure that you will not want to use a second cab in future get the 4Ohm version.

    If you're thinking of getting a second cab (e.g. 410) later and using it together with the 115 you should get the 8Ohm version.

    Don't worry about frequency response, you don't need it here.


Share This Page