Separate names with a comma.
Discussion in 'Pickups & Electronics [BG]' started by godoze, Apr 29, 2003.
please look at this schematic and tell me where the wire for tone control is !
I don't understand your question? What kind of bass are you putting these/this pick up in? What other controls do you have?
Maybe this will help:
<img src="http://www.seymourduncan.com/website/support/schematics/schematicsjpg/active_soapbar_bass.jpg" width=650>
<a href="http://www.seymourduncan.com/website/support/schematics/schematicsjpg/active_soapbar_bass.jpg"><b>CLICK HERE</b></a> for a full size diagram
I am putting them in a jazz that i am building.
The question tho, now that i see that schematic is how do i wire this so each pick up has a tone control ?
going to be just vol/ tone for each pup; i decided to leave the preamp out and use an outboard .
Hmm, I'm confused. What on-board are you using? I'm you'd have to check with the pre-amp make to see if you can wire the pre-amp that way.
no onboard preamp; going to be passive.
This is the closest thing I could find. I remember a friend of mind trying to wire a guitar the same way you wanted to with out a switch & he ran into some problems. I'll get in touch with him & see what he says,
<img src="http://www.seymourduncan.com/website/support/schematics/schematicsjpg/livewire_humbuckers.jpg" width=650>
Full size, <a href="http://www.seymourduncan.com/website/support/schematics/2active_hum_2vol_2tone_3wy.html"><b>CLICK HERE</b></a>
the other option might be vol/blend/tone/tone.
what do you think of that ?